DryGear Pro Stations

The DryGear Professional is a powerful, efficient, and easy to use drying system. This system is completely safe for ALL turnout gear! The polyester vinyl tent enclosure ensures that the inside and outside surfaces of all equipment receives the maximum amount of exposure to moving air. Each station is able to accommodate a complete set of turnout gear including coat, pants, boots, helmet and gloves. This multi-station system is available in 3, 4, 6, 7, and 8 station configurations.

• With Wheels
• Exceeds NFPA 1851 recommendations
• Hanger Tube Assemblies Include Suspender Hooks
• Completely Dry the Inside and Outside of Gear in 4 to 5 Hours
• Transparent Easy Access Roll-Up Front Cover
• Manifold and Frame Surfaces have an Industrial Powder Coat Finish
• Available with an Optional Caster Kit (Wheels)
• Tested and Proven in the Field Since 1992
• Utilizes Forced Air Ventilation
• No Mechanical Action To Damage Gear
• System Operates With Or Without Heated Air
• Heated Air Does Not Reach Gear-Degrading Temperatures
• Built-In Heater Cutoff Protection
• Special Shipping - Call For Quote
• Safe For All Turnout Gear

Control Panel Features:
• Simple Operating Instructions
• Six Hour Timer Switch
• Air Only/Air & Heat Select Switch
• Heater Selected Indicator Light

Specifications:
• Air Flow 40-50 Cubic feet per minute (CFM) per station
• Electrical requirements 220 VAC, 30 Amps

Dimensions:
• 3 Station: 71 Inches Long, 84 Inches High, 37 Inches Wide, And 376 Pounds
• 4 Station: 86 inches Long, 87 Inches High, 37 Inches Wide, And 404 Pounds
• 6 Station: 121 Inches Long, 84 Inches High, 37 Inches Wide And 432 Pounds
• 7 Station: 138 Inches Long, 87 Inches hHgh, 37 Inches Wide And 448 Pounds
• 8 Station: 153 Inches Long, 84 Inches High, 37 Inches Wide And 464 Pounds

• Motor (3,4, and 6 stations)
Power : 3 HP
Voltage : 208/230 Volts
Current : 15.5/15.3 Amps
Type : NEMA 56

• Motor (7 and 8 stations)
Power: 5 HP
Voltage : 220 Volts
Current : 19.6 Amps
Type : NEMA 56

• Heater
Power : 2400 Watts
Current : 10 Amps
Thermistor : Overheat Cutoff
Timer : 6 Hours

• Materials
Tubing : Aluminum square and round tubing
Enclosure : Rip-stop polyester vinyl